FAA Finally Phasing Out Floppy Disks From Air Traffic Control Systems
With 2026 drawing to a close, you’d think that the United States’ air traffic control would be using some type of state-of-the-art system. Unfortunately, that’s not the case at a majority of the facilities across the country.
Many Federal Aviation Administration (FAA) systems across the U.S. still use floppy disks for storage and retrieval of a variety of essential data such as weather information, NOTAMs (Notice to Airmen), and procedures relevant to enroute controllers and TRACON (Terminal Radar Approach Control). I guess they took the saying “if it ain’t broke, don’t fix it” a bit too seriously (jokes).
Floppy disks are still used at over 400 FAA facilities across the United States as part of the following four systems: IDS-4 (Information Display System, Model 4), ACE-IDS (ASOS Controller Equipment – Information Display System; ASOS means Automated Surface Observing System), NIDS (National Airspace System Information Display System) and ERIDS (En Route Information Display System).
These systems were first rolled out in the 1990s and early 2000s, and the same floppy disk storage systems is still being used at a majority of those facilities up to this day.
This is finally changing as the FAA is rolling out its new “Enterprise – Information Display System (E-IDS)” which will replace these four outdated systems. The same data presented across the four older systems will now be electronically available via one centralized system and won’t rely on extremely dated floppy disk medium for storage.
“E-IDS gives air traffic controllers the information they need to make timely decisions and keep the flying public safe,” said FAA Administrator Bryan Bedford. “We’re moving away from outdated, manual processes and replacing technology that once relied on floppy disks with a modern system that allows controllers to instantly share critical flight alerts, restricted airspace schedules and pilot reports across the National Airspace System.”
The upgrades are being rolled out at five facilities including Atlantic City International Airport, Nashville International Airport, Greater Rochester International Airport, and two data processing hubs in Atlanta and Salt Lake City.
According to the FAA, E-IDS will be installed at 435 sites by the end of 2028, completely phasing out the older systems. The upgrade is part of a broader ATC modernization project which including moving systems from copper to fiber optic, installing more Surface Awareness Initiative (SAI) systems at airports, moving more towers to electronic flight strips, and installing IP Voice Switches for landline communication.
The E-IDS project has been in the works for quite some time, with the contract being awarded to a defense contractor in 2020. Unfortunately, they were not able to complete the upgrade as the project ran into serious delivery problems, and the contract was ended in 2025 and taken over internally. Originally planned to be completed by 2034, the FAA has expedited the upgrade, aiming to complete the system upgrade by September 2028.
Even though E-IDS should bring modernization to how certain data is delivered to FAA facilities, it’s just one piece of the puzzle. The air traffic control organization still has a long way to go in terms of upgrades and reliability. Just look at the November 13th outage, which resulted in a ground stop affecting over 18,000 flights.
The FAA says the problem was telecommunications related, claiming that their network became overwhelmed after being flooded with traffic. They suspect that two facilities (a radar site in Amarillo, Texas and a radio communications site in El Dorado, Arkansas) might be the culprits. After blocking traffic from these two sites, the FAA’s network service provider L3 Harris was able to stabilize the network and restore service.
Sign up for the free Gate Checked newsletter here sent three times weekly.



